Volkswagen Key Programming Tips
Volkswagen provides an easy method to replace keys that have stopped working, or to add a second. With a few basic tips the procedure is simple and inexpensive.
First, you need to locate the correct key fob. It should have a key blade that flips out or be internally fixed in the key fob. Then, you must gather all the required documentation to verify ownership. Then, go to the dealership or a locksmith who is a third party.
Immobilizer
The immobilizer function is an anti-theft device that prevents keys that are damaged or unauthorised from being able to start the vehicle. The system operates by recognizing a particular chip in each key. A VW dealer or automotive locksmith can program additional keys, however this process requires specialized tools and software. Using the right tools will ensure the smoothest programming experience. Technicians should try to reproduce the issue before beginning the key programming. They should also search the vehicle for fault codes, search for technical service bulletins (TSBs), and test the battery inside the key fob.
A Volkswagen key that is not programmed with an immobilizer chip shuts off the engine after a couple of seconds of cranking. The immobilizer chip doesn't stop the alarm from turning on or unlocking doors. The key fob's immobilizer is an additional component that is attached to the flip side of the car key. It needs to be programmed into the computer of the vehicle in order to function.
The process of adding a new key to the VW is more expensive than creating a duplicate key when all the originals are lost. The key must be purchased from the manufacturer and go through special programming to be synchronized with the car's computer. This can be accomplished by a professional using software like VagTacho and VCDS. This procedure is recommended for vehicles running the older Immobilizer 2 system and earlier.
Electronic Ignition
The electronic ignition feature of keys is a crucial element of the anti-theft technology in vehicles. The feature is activated when the key fob is placed in the ignition. However, it's not 100% reliable. It is susceptible to malfunctions, which could cause your VW engine not running. This can be due to many reasons such as incorrect key programming or a battery that is not properly maintained.
Fortunately, you can steer clear of this problem by getting your Volkswagen car key fobs programmed professionally. This process can be done by a dealer or a locksmith. The costs for this service are different and are typically between $90 and $150. The prices will also vary based on the model of your vehicle and year.
To program a new VW key fob, you'll need the primary working key. The new key must be capable of starting the vehicle's engine. The onboard diagnostics will then recognize it as genuine keys. The immobilizer light will turn off.
Some models require a PIN code of three or four digits, to enable onboard key programming. Others may require a scan tool for this. G28CarKeys or dealer could use a scanner to program keys onboard. These scanners aren't in the general car accessory stores, and you will need to either purchase one or borrow it from a dealership.
Keyless Entry
If you have lost your Volkswagen key fob or has a battery problem, the car may start but not unlock. Luckily, it's easy to fix this issue. The first step is to verify that the key fob is within range of the vehicle. If it is, hold the lock button for six seconds, until the lights flash on the key.
The key fob will now be reset to the closest point it can be to your VW. You can then unlock the vehicle by pressing the unlock button on the key fob. If your vehicle is still unable to unlock, you'll have to make contact with a dealer in order to have the key programmed.
The cost of programming a brand new Volkswagen Key could be costly. It is recommended to get estimates from several dealers before selecting the one that is right for you. Make sure to ask if the dealer is going to charge you for both the key and the programming.
Purchasing an extra Volkswagen key is a good idea for many reasons. You may require an extra key in the event that your primary key is lost or stolen. Here are some steps to follow if you own an extra Volkswagen key and would like to program it to work with your Volkswagen.
Remote Start
Contrary to earlier generation key fobs that communicated with the vehicle using radio waves, Volkswagen's remote-start systems communicate with your car using a secure wireless connection using the cellular technology. VW Atlas, Jetta or Passat can sense that you are within range to activate features like keyless start or push-button entry. Getting started is as simple as opening the app on your smartphone, connecting it to your vehicle, then pressing the button.
Make sure that your Volkswagen is parked and that the driver's-side door is closed. This will ensure that only the correct key is used to access your vehicle’s features. If the key isn't recognized, the dashboard will display an error message. In addition, this option can only be used on newer VW models that feature an RFID sensor ring that is attached to the steering column. These models require a secret pin to be programmed.
To program the new key fob, close the driver's door and take out the key that was used for the original. Then, press the lock button on the new key fob. This will notify the vehicle that it is functioning key. Then, it will begin to transmit signals that allow you to unlock the door of the driver, and then remotely start your car. Some say that it only works when there is an unobstructed view of the car. Others have reported success in parking areas that are packed.